The advantages of titanium composite plate tank are introduced

1, remove the oxidation and decarbonization of the workpiece surface during the heating process, and obtain a clean surface without metamorphic layer. This is of considerable relevance to the improvement of cutting performance of tools that grind only one side during sharpening (such as twist drill grinding that exposes the decarbonized layer of the groove surface directly to the cutting edge).

2, no pollution to the environment, no need to carry out three waste treatment.

3, titanium composite plate tank temperature measurement, monitoring accuracy significantly increased. The indicated value of the thermocouple and the furnace temperature reach ±1.5°c. However, the temperature difference of different parts of a large number of workpieces in the furnace is large, and if the rarefied gas is forced to operate, it can still be controlled within the temperature difference range of ±5°c.

4. High degree of mechatronics. On the basis of the increase of temperature measurement and control accuracy, workpiece movement, air pressure adjustment, power adjustment, etc. can be pre-programmed to implement quenching and tempering step by step.

5, the energy consumption is significantly lower than the salt bath furnace. Modern excellent titanium composite plate tank heating chamber with good insulation materials made of heat insulation wall, can be concentrated in the heating chamber, energy saving efficiency is obvious.

Composite steel is widely used in petroleum, chemical, Marine and military production to make many types of corrosion resistant equipment. At present, composite steel is a bimetallic sheet made of thin stainless steel and thick low alloy steel by blasting welding, rolling or surfacing welding. The thicker pearlitic steel part is the base, and the base is mostly composed of low carbon steel or low alloy steel, mainly to meet the strength and stiffness requirements of composite steel in use. The stainless steel part is laminated, which mainly meets the requirements of corrosion resistance of composite steel. With the continuous expansion of the application range of composite steel, its welding has attracted more and more attention.